+++ access m/e/m/e 2.0 online for real1 === http://meme20.k0a1a.net \\\

m/e/m/e 2.0
dreams of the 21st century

m/e/m/e 2.0 is a mechanical Web server. The machine allows its visitor to navigate through a maze of hyper-linked, material webpages. Opposed to its digital protagonist the mechanical body of m/e/m/e 2.0 can not be re-multiplied to a spontaneous number of requests, instead all of its users come to share one analogue broadcast.
The machine physically transforms itself whenever user clicks a link; the information is transmitted to all connected users, meshing and colliding their experiences. Seemingly a constraint becomes a feature - unbodied cyberspace gets filled with physical presence.

m/e/m/e 2.0 is a manifestation of the absence of any human traits in an act of network communication. It is a device that converts digital instances of netizens into humanoids, adding flesh around immaterial skeletons. By the analogy to what's known as "modem" (MOdulator-DEModulator, a device used for digital communication over analog, physical mediums), "m/e/m/e 2.0" is a "semi-modem" - it materializes (modulates) without caring to convert back into binary format.


m/e/m/e 2.0 online
m/e/m/e 2.0 online

the only remaining bits of reality, namely the [input type="button"], are collected all together and materialized (using etched PCB) in order to shift the paradigms of online living and question the necessity of pervasive digitalization. coming to us from the future (around 2070 AC) m/e/m/e 2.0 tells stories of few dozen popular websites, shadows of which are archived within the system. opposed to immaterial contents of its subjects, pages of m/e/m/e 2.0 are hard-copies made of circuit board material; they are mechanically shifted and exposed infront of the image sensor. surprisingly, the machine is connected to the internet and the contents of m/e/m/e 2.0 can be navigated via conventional interface of a web browser.

today, with the appearance of MIDs (mobile internet devices), web OSes and web applications, m/e/m/e 2.0 reminds us of oddnesses of web two dot zero. emphasizing on alienated characteristics of peoples' internet the project questions the dogmas of "global electronic pasture" - online interaction, privacy and virtual ownership. the future generation of networked habitat owe to have a reality check, leaving obsolete ideas behind.

the machine of m/e/m/e 2.0 allows its visitor to sense not only the surfaces of the system but also to get into an strange relationship with the concurent users. $USER begins to understand intimacy over a distance. the mechanical body can not be re-multiplied to a spontaneous number of requests, instead all of the users come to share one analogue broadcast medium. whenever someone clicks to open a new link, the information is transmitted to all connected users, 'meshing' and colliding their sessions. seemingly a constraint becomes a feature - unbodied cyberspace gets filled with physical presence. the consequence is that it turns web browsing into a broadcast, collective group activity without any predefined rules. each page is a part of info-system contained with-in m/e/m/e 2.0, all pages are hyper-linked into a mesh that has no beginning or end.

m/e/m/e 2.0 operates with UI buttons, so ubiquitous all over the www. while being a metaphor of a real world object, is one of the most "material" things on the web, by name, look and function. button is basically a replacement for grammatical particle "to" - when clicking on a button we explicitly commit to something (to login, to upload, to submit, etc). in this way buttons verbally articulate our online behavior. however, framed within the world of www all of the actions signified by remain in the realm of virtuality (an exclusion is a "print" button), making it often impossible to experience the significance of any action executed by pressing a button. m/e/m/e 2.0 transforms the metaphorical object back into its physical prototype, subsequently allowing the users to understand its function.

browse the source code and other materials related to m/e/m/e 2.0, see more pictures at the "alienated" flickr m/e/m/e 2.0 page, read the text by Eric Kluitenberg where he mentions m/e/m/e 2.0 as the example of world/model/observer/interface device.

video - m/e/m/e 2.0, final release, v1.0

m/e/m/e 2.0, "very hard copies"

video - m/e/m/e 2.0, beta EXAM release, v0.2

video - m/e/m/e 2.0 alpha, first test session, v0.1

video - m/e/m/e 2.0 3d model

see more
back to k0a1a.net | contact
m/e/m/e 2.0, 2008 by Danja Vasiliev is licensed under a Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 Unported License.
Creative Commons License
> dmesg
[    0.000000] Linux version 2.6.22-14-server (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease)
(Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 08:27:05 UTC 2008 (Ubuntu 2.6.22-14.52-server)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
[    0.000000]  BIOS-e820: 000000001def0000 - 000000001def3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001def3000 - 000000001df00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 478MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f3940
[    0.000000] Entering add_active_range(0, 0, 122608) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   122608
[    0.000000]   HighMem    122608 ->   122608
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   122608
[    0.000000] On node 0 totalpages: 122608
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 925 pages used for memmap
[    0.000000]   Normal zone: 117587 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7A10 checksum 0
[    0.000000] ACPI: RSDP 000F7A10, 0014 (r0 CX700 )
[    0.000000] ACPI: RSDT 1DEF3040, 0030 (r1 CX700  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 1DEF30C0, 0074 (r1 CX700  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 1DEF3180, 496C (r1 CX700  AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 1DEF0000, 0040
[    0.000000] ACPI: MCFG 1DEF7C00, 003C (r1 CX700  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 1DEF7B40, 005A (r1 CX700  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:10 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 1df00000:c2100000)
[    0.000000] Built 1 zonelists.  Total pages: 121651
[    0.000000] Kernel command line: root=UUID=d61673b7-c550-4610-b9af-af4a8676acd1 ro nosplash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 999.900 MHz processor.
[   27.842019] Console: colour VGA+ 80x25
[   27.844535] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   27.845352] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   27.876960] Memory: 474600k/490432k available (2047k kernel code, 15292k reserved, 920k data, 364k init, 0k highmem)
[   27.877056] virtual kernel memory layout:
[   27.877060]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   27.877065]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[   27.877070]     vmalloc : 0xde800000 - 0xffbfe000   ( 531 MB)
[   27.877075]     lowmem  : 0xc0000000 - 0xddef0000   ( 478 MB)
[   27.877080]       .init : 0xc03eb000 - 0xc0446000   ( 364 kB)
[   27.877085]       .data : 0xc02ffd96 - 0xc03e5f04   ( 920 kB)
[   27.877090]       .text : 0xc0100000 - 0xc02ffd96   (2047 kB)
[   27.877467] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   27.877657] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   28.027728] Calibrating delay using timer specific routine.. 2000.96 BogoMIPS (lpj=10004814)
[   28.027873] Security Framework v1.0.0 initialized
[   28.027931] SELinux:  Disabled at boot.
[   28.028023] Mount-cache hash table entries: 512
[   28.028283] CPU: After generic identify, caps: 87c9bbff 00000000 00000000 00000000 00000081 00000000 00000000
[   28.028308] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   28.028365] CPU: L2 Cache: 128K (64 bytes/line)
[   28.028416] CPU: After all inits, caps: 07c9bbff 00000000 00000000 00000000 00000081 00003fcc 00000000
[   28.028439] Compat vDSO mapped to ffffe000.
[   28.028512] Checking 'hlt' instruction... OK.
[   28.068083] SMP alternatives: switching to UP code
[   28.068613] Freeing SMP alternatives: 11k freed
[   28.069391] Early unpacking initramfs... done
[   29.157840] ACPI: Core revision 20070126
[   29.158047] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   29.165995] CPU0: Centaur VIA Esther processor 1000MHz stepping 09
[   29.166185] Total of 1 processors activated (2000.96 BogoMIPS).
[   29.166421] ENABLING IO-APIC IRQs
[   29.166688] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   29.377681] Brought up 1 CPUs
[   29.377941] Booting paravirtualized kernel on bare hardware
[   29.378092] Time: 15:07:07  Date: 08/10/108
[   29.378179] NET: Registered protocol family 16
[   29.378384] EISA bus registered
[   29.378445] ACPI: bus type pci registered
[   29.385090] PCI: PCI BIOS revision 3.00 entry at 0xf95e0, last bus=128
[   29.385141] PCI: Using configuration type 1
[   29.385189] Setting up standard PCI resources
[   29.396037] ACPI: EC: Look up EC in DSDT
[   29.410143] ACPI: Interpreter enabled
[   29.410200] ACPI: (supports S0 S1 S3 S4 S5)
[   29.410468] ACPI: Using IOAPIC for interrupt routing
[   29.422654] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   29.422729] PCI: Probing PCI hardware (bus 00)
[   29.423811] PCI: Transparent bridge - 0000:00:13.1
[   29.423900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   29.424489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[   29.485480] ACPI: PCI Root Bridge [PCI1] (0000:80)
[   29.485554] PCI: Probing PCI hardware (bus 80)
[   29.485730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[   29.487049] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 6 7 10 11 12)
[   29.487869] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12)
[   29.488663] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[   29.489455] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[   29.490219] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   29.491007] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   29.491794] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   29.492581] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   29.493225] Linux Plug and Play Support v0.97 (c) Adam Belay
[   29.493293] pnp: PnP ACPI init
[   29.493355] ACPI: bus type pnp registered
[   29.499537] pnp: PnP ACPI: found 11 devices
[   29.499593] ACPI: ACPI bus type pnp unregistered
[   29.499645] PnPBIOS: Disabled by ACPI PNP
[   29.499795] PCI: Using ACPI for IRQ routing
[   29.499846] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   30.062874] NET: Registered protocol family 8
[   30.062922] NET: Registered protocol family 20
[   30.062986] NetLabel: Initializing
[   30.063032] NetLabel:  domain hash size = 128
[   30.063080] NetLabel:  protocols = UNLABELED CIPSOv4
[   30.063152] NetLabel:  unlabeled traffic allowed by default
[   30.063318] pnp: 00:01: ioport range 0x400-0x47f has been reserved
[   30.063372] pnp: 00:01: ioport range 0x500-0x50f has been reserved
[   30.063446] pnp: 00:07: iomem range 0xf0000000-0xf0000fff has been reserved
[   30.063508] pnp: 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
[   30.063578] pnp: 00:0a: iomem range 0xf0000-0xfffff could not be reserved
[   30.063633] pnp: 00:0a: iomem range 0x1def0000-0x1defffff could not be reserved
[   30.063696] pnp: 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
[   30.063758] pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
[   30.067552] Time: tsc clocksource has been installed.
[   30.094387] PCI: Bridge: 0000:00:01.0
[   30.094435]   IO window: e000-efff
[   30.094486]   MEM window: dd000000-deffffff
[   30.094537]   PREFETCH window: a0000000-bfffffff
[   30.094588] PCI: Bridge: 0000:00:13.1
[   30.094636]   IO window: d000-dfff
[   30.094686]   MEM window: dfe00000-dfefffff
[   30.094736]   PREFETCH window: dfd00000-dfdfffff
[   30.094801] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   30.094815] PCI: Setting latency timer of device 0000:00:13.1 to 64
[   30.094849] NET: Registered protocol family 2
[   30.187623] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   30.187774] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[   30.188289] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   30.188639] TCP: Hash tables configured (established 16384 bind 16384)
[   30.188691] TCP reno registered
[   30.217840] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[   31.265440]  it is
[   32.366624] Freeing initrd memory: 7142k freed
[   32.367185] audit: initializing netlink socket (disabled)
[   32.367253] audit(1221059228.700:1): initialized
[   32.372209] VFS: Disk quotas dquot_6.5.1
[   32.372388] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   32.372642] io scheduler noop registered
[   32.372691] io scheduler anticipatory registered
[   32.372740] io scheduler deadline registered (default)
[   32.372841] io scheduler cfq registered
[   32.372912] PCI: VIA PCI bridge detected. Disabling DAC.
[   32.373033] Boot video device is 0000:01:00.0
[   32.373340] isapnp: Scanning for PnP cards...
[   32.730163] isapnp: No Plug & Play device found
[   32.824203] Real Time Clock Driver v1.12ac
[   32.824407] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   32.827509] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   32.828030] input: Macintosh mouse button emulation as /class/input/input0
[   32.828301] PNP: No PS/2 controller found. Probing ports directly.
[   33.077307] serio: i8042 KBD port at 0x60,0x64 irq 1
[   33.077645] mice: PS/2 mouse device common for all mice
[   33.077906] EISA: Probing bus 0 at eisa.0
[   33.078023] EISA: Detected 0 cards.
[   33.078348] TCP cubic registered
[   33.078419] NET: Registered protocol family 1
[   33.078520] Using IPI No-Shortcut mode
[   33.078922]   Magic number: 8:424:133
[   33.079284]   hash matches device device:08
[   33.079837] Freeing unused kernel memory: 364k freed
[   33.612010] AppArmor: AppArmor initialized<5>audit(1221059230.200:2):  type=1505 info="AppArmor initialized" pid=1096
[   33.638774] fuse init (API version 7.8)
[   33.651168] Failure registering capabilities with primary security module.
[   35.393591] SCSI subsystem initialized
[   35.420114] libata version 2.21 loaded.
[   35.423421] usbcore: registered new interface driver usbfs
[   35.423520] usbcore: registered new interface driver hub
[   35.423628] usbcore: registered new device driver usb
[   35.438559] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   35.438621] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   35.440102] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[   35.440188] VP_IDE: chipset revision 0
[   35.440235] VP_IDE: not 100% native mode: will probe irqs later
[   35.440296] VP_IDE: VIA cx700 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[   35.440361]     ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio
[   35.440496]     ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
[   35.440626] Probing IDE interface ide0...
[   35.452020] USB Universal Host Controller Interface driver v3.0
[   35.970962] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   35.971027] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[   36.126950] Probing IDE interface ide1...
[   36.566888] hdc: TOSHIBA MK4025GAS, ATA DISK drive
[   37.286852] ide1 at 0x170-0x177,0x376 on irq 15
[   37.337480] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 16
[   37.337596] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   37.338009] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   37.338105] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000fe00
[   37.338429] usb usb1: configuration #1 chosen from 1 choice
[   37.338535] hub 1-0:1.0: USB hub found
[   37.338592] hub 1-0:1.0: 2 ports detected
[   37.358337] hdc: max request size: 128KiB
[   37.360179] hdc: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33)
[   37.360426] hdc: cache flushes supported
[   37.360552]  hdc: hdc1 hdc2 hdc3
[   37.446971] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 17
[   37.447085] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   37.447178] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   37.447271] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000fd00
[   37.447550] usb usb2: configuration #1 chosen from 1 choice
[   37.447656] hub 2-0:1.0: USB hub found
[   37.447713] hub 2-0:1.0: 2 ports detected
[   37.556922] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 18
[   37.557037] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   37.557132] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   37.557222] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000fc00
[   37.557499] usb usb3: configuration #1 chosen from 1 choice
[   37.557603] hub 3-0:1.0: USB hub found
[   37.557661] hub 3-0:1.0: 2 ports detected
[   37.667161] ACPI: PCI Interrupt 0000:00:10.4[D] -> GSI 23 (level, low) -> IRQ 19
[   37.667280] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   37.667388] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[   37.667500] ehci_hcd 0000:00:10.4: debug port 1
[   37.667566] ehci_hcd 0000:00:10.4: irq 19, io mem 0xdffff000
[   37.726751] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   37.726835] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   37.727153] usb usb4: configuration #1 chosen from 1 choice
[   37.727260] hub 4-0:1.0: USB hub found
[   37.727319] hub 4-0:1.0: 6 ports detected
[   37.837138] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 20
[   37.842617] eth0: VIA Rhine III at 0x1de00, 00:40:63:f4:69:f6, IRQ 20.
[   37.843571] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 43e1.
[   38.135526] kjournald starting.  Commit interval 5 seconds
[   38.135597] EXT3-fs: mounted filesystem with ordered data mode.
[   39.436505] usb 4-3: new high speed USB device using ehci_hcd and address 4
[   39.587868] usb 4-3: configuration #1 chosen from 1 choice
[   39.588257] hub 4-3:1.0: USB hub found
[   39.588552] hub 4-3:1.0: 4 ports detected
[   40.256385] usb 2-2: new full speed USB device using uhci_hcd and address 2
[   40.432826] usb 2-2: configuration #1 chosen from 1 choice
[   40.435695] hub 2-2:1.0: USB hub found
[   40.438639] hub 2-2:1.0: 4 ports detected
[   40.826319] usb 1-1: new full speed USB device using uhci_hcd and address 3
[   41.003984] usb 1-1: configuration #1 chosen from 1 choice
[   41.006874] hub 1-1:1.0: USB hub found
[   41.009809] hub 1-1:1.0: 4 ports detected
[   41.396256] usb 1-2: new full speed USB device using uhci_hcd and address 4
[   41.573928] usb 1-2: configuration #1 chosen from 1 choice
[   41.576801] hub 1-2:1.0: USB hub found
[   41.579743] hub 1-2:1.0: 4 ports detected
[   41.926474] usb 4-3.1: new full speed USB device using ehci_hcd and address 6
[   42.037541] usb 4-3.1: configuration #1 chosen from 1 choice
[   42.276352] usb 4-3.3: new full speed USB device using ehci_hcd and address 7
[   42.392552] usb 4-3.3: configuration #1 chosen from 1 choice
[   42.626362] usb 4-3.4: new full speed USB device using ehci_hcd and address 8
[   42.737182] usb 4-3.4: configuration #1 chosen from 1 choice
[   42.737419] hub 4-3.4:1.0: USB hub found
[   42.737604] hub 4-3.4:1.0: 4 ports detected
[   43.087344] usb 2-2.1: new full speed USB device using uhci_hcd and address 3
[   43.193327] usb 2-2.1: not running at top speed; connect to a high speed hub
[   43.221533] usb 2-2.1: configuration #1 chosen from 1 choice
[   43.467309] usb 2-2.2: new full speed USB device using uhci_hcd and address 4
[   43.573285] usb 2-2.2: not running at top speed; connect to a high speed hub
[   43.601495] usb 2-2.2: configuration #1 chosen from 1 choice
[   43.847259] usb 2-2.3: new full speed USB device using uhci_hcd and address 5
[   43.953242] usb 2-2.3: not running at top speed; connect to a high speed hub
[   43.981451] usb 2-2.3: configuration #1 chosen from 1 choice
[   44.227214] usb 2-2.4: new full speed USB device using uhci_hcd and address 6
[   44.333201] usb 2-2.4: not running at top speed; connect to a high speed hub
[   44.361410] usb 2-2.4: configuration #1 chosen from 1 choice
[   44.607414] usb 1-1.1: new full speed USB device using uhci_hcd and address 5
[   44.713387] usb 1-1.1: not running at top speed; connect to a high speed hub
[   44.741596] usb 1-1.1: configuration #1 chosen from 1 choice
[   44.987360] usb 1-1.2: new full speed USB device using uhci_hcd and address 6
[   45.093345] usb 1-1.2: not running at top speed; connect to a high speed hub
[   45.121586] usb 1-1.2: configuration #1 chosen from 1 choice
[   45.367319] usb 1-1.3: new full speed USB device using uhci_hcd and address 7
[   45.473300] usb 1-1.3: not running at top speed; connect to a high speed hub
[   45.501510] usb 1-1.3: configuration #1 chosen from 1 choice
[   45.747274] usb 1-1.4: new full speed USB device using uhci_hcd and address 8
[   45.852256] usb 1-1.4: not running at top speed; connect to a high speed hub
[   45.880479] usb 1-1.4: configuration #1 chosen from 1 choice
[   46.127231] usb 1-2.1: new full speed USB device using uhci_hcd and address 9
[   46.233212] usb 1-2.1: not running at top speed; connect to a high speed hub
[   46.261464] usb 1-2.1: configuration #1 chosen from 1 choice
[   46.507189] usb 1-2.2: new full speed USB device using uhci_hcd and address 10
[   46.613172] usb 1-2.2: not running at top speed; connect to a high speed hub
[   46.640419] usb 1-2.2: configuration #1 chosen from 1 choice
[   46.887144] usb 1-2.3: new full speed USB device using uhci_hcd and address 11
[   46.993138] usb 1-2.3: not running at top speed; connect to a high speed hub
[   47.020363] usb 1-2.3: configuration #1 chosen from 1 choice
[   47.267107] usb 1-2.4: new full speed USB device using uhci_hcd and address 12
[   47.373106] usb 1-2.4: not running at top speed; connect to a high speed hub
[   47.401345] usb 1-2.4: configuration #1 chosen from 1 choice
[   50.679513] eth3: link up, 100Mbps, full-duplex, lpa 0x43E1
[   52.754126] NET: Registered protocol family 17
[   55.551338] Linux agpgart interface v0.102 (c) Dave Jones
[   55.732310] agpgart: Detected VIA CX700 chipset
[   55.736908] agpgart: AGP aperture is 64M @ 0xd8000000
[   55.829037] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   56.154824] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   60.793006] usbcore: registered new interface driver libusual
[   64.381139] Initializing USB Mass Storage driver...
[   64.423904] scsi0 : SCSI emulation for USB Mass Storage devices
[   64.424198] usb-storage: device found at 3
[   64.424205] usb-storage: waiting for device to settle before scanning
[   64.424243] scsi1 : SCSI emulation for USB Mass Storage devices
[   64.424440] usb-storage: device found at 4
[   64.424446] usb-storage: waiting for device to settle before scanning
[   64.424480] scsi2 : SCSI emulation for USB Mass Storage devices
[   64.424706] usb-storage: device found at 5
[   64.424713] usb-storage: waiting for device to settle before scanning
[   64.424747] scsi3 : SCSI emulation for USB Mass Storage devices
[   64.424954] usb-storage: device found at 6
[   64.424961] usb-storage: waiting for device to settle before scanning
[   64.425001] scsi4 : SCSI emulation for USB Mass Storage devices
[   64.425203] usb-storage: device found at 5
[   64.425209] usb-storage: waiting for device to settle before scanning
[   64.425243] scsi5 : SCSI emulation for USB Mass Storage devices
[   64.425454] usb-storage: device found at 6
[   64.425461] usb-storage: waiting for device to settle before scanning
[   64.425494] scsi6 : SCSI emulation for USB Mass Storage devices
[   64.425687] usb-storage: device found at 7
[   64.425693] usb-storage: waiting for device to settle before scanning
[   64.425727] scsi7 : SCSI emulation for USB Mass Storage devices
[   64.425929] usb-storage: device found at 8
[   64.425935] usb-storage: waiting for device to settle before scanning
[   64.425969] scsi8 : SCSI emulation for USB Mass Storage devices
[   64.426171] usb-storage: device found at 9
[   64.426178] usb-storage: waiting for device to settle before scanning
[   64.426212] scsi9 : SCSI emulation for USB Mass Storage devices
[   64.426413] usb-storage: device found at 10
[   64.426420] usb-storage: waiting for device to settle before scanning
[   64.426453] scsi10 : SCSI emulation for USB Mass Storage devices
[   64.426682] usb-storage: device found at 11
[   64.426688] usb-storage: waiting for device to settle before scanning
[   64.426723] scsi11 : SCSI emulation for USB Mass Storage devices
[   64.426914] usbcore: registered new interface driver usb-storage
[   64.426969] USB Mass Storage support registered.
[   64.427020] usb-storage: device found at 12
[   64.427026] usb-storage: waiting for device to settle before scanning
[   64.790189] Linux video capture interface: v2.00
[   64.871844] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX) 
[   65.186275] input: PC Speaker as /class/input/input1
[   65.245625] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 21
[   65.245767] PCI: Setting latency timer of device 0000:80:01.0 to 64
[   65.421297] usbcore: registered new interface driver gspca
[   65.421364] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[   65.423573] usbcore: registered new interface driver usbserial
[   65.423671] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[   65.423808] usbcore: registered new interface driver usbserial_generic
[   65.423864] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[   65.479015] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
[   65.479167] ftdi_sio 4-3.3:1.0: FTDI USB Serial Device converter detected
[   65.479269] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: Detected FT232RL
[   65.479721] usb 4-3.3: FTDI USB Serial Device converter now attached to ttyUSB0
[   65.479811] usbcore: registered new interface driver ftdi_sio
[   65.479864] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
[   65.501708] usbcore: registered new interface driver snd-usb-audio
[   67.205394] lp: driver loaded but no devices found
[   67.437976] Adding 2096472k swap on /dev/hdc3.  Priority:-1 extents:1 across:2096472k
[   68.017065] EXT3 FS on hdc2, internal journal
[   68.939868] NET: Registered protocol family 10
[   68.940080] lo: Disabled Privacy Extensions
[   69.424447] usb-storage: device scan complete
[   69.424682] usb-storage: device scan complete
[   69.424713] usb-storage: device scan complete
[   69.424791] usb-storage: device scan complete
[   69.424872] usb-storage: device scan complete
[   69.424954] usb-storage: device scan complete
[   69.425027] usb-storage: device scan complete
[   69.425098] usb-storage: device scan complete
[   69.425168] usb-storage: device scan complete
[   69.425241] usb-storage: device scan complete
[   69.425321] usb-storage: device scan complete
[   69.425452] usb-storage: device scan complete
[   69.427693] scsi 3:0:0:0: CD-ROM            LITE-ON  CD-ROM LTN-529S  7S06 PQ: 0 ANSI: 0 CCS
[   69.428466] scsi 4:0:0:0: CD-ROM            LITE-ON  COMBO SOHC-5232K NK0A PQ: 0 ANSI: 0
[   69.428550] scsi 6:0:0:0: CD-ROM            ATAPI    CD-RW 52XMax     160D PQ: 0 ANSI: 0 CCS
[   69.428622] scsi 7:0:0:0: CD-ROM            OEM      CD-ROM F563E     1.00 PQ: 0 ANSI: 0 CCS
[   69.428677] scsi 8:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8481B  1.00 PQ: 0 ANSI: 0
[   69.428730] scsi 9:0:0:0: CD-ROM            LITE-ON  CD-ROM LTN-527T  5S0C PQ: 0 ANSI: 0 CCS
[   69.432697] scsi 0:0:0:0: CD-ROM            HITACHI  DVD-ROM GD-5000  0212 PQ: 0 ANSI: 0 CCS
[   69.432969] scsi 1:0:0:0: CD-ROM            SONY     CD-RW  CRX230ED  4YS1 PQ: 0 ANSI: 0
[   69.433094] scsi 2:0:0:0: CD-ROM            HL-DT-ST CD-ROM GCR-8520B 1.00 PQ: 0 ANSI: 0 CCS
[   69.433241] scsi 5:0:0:0: CD-ROM            LG       CD-ROM CRD-8522B 2.03 PQ: 0 ANSI: 0 CCS
[   69.433295] scsi 10:0:0:0: CD-ROM            HL-DT-ST CD-ROM GCR-8522B 1.00 PQ: 0 ANSI: 0 CCS
[   69.433375] scsi 11:0:0:0: CD-ROM            HL-DT-ST CD-ROM GCR-8523B 1.01 PQ: 0 ANSI: 0 CCS
[   69.716327] sr0: scsi3-mmc drive: 14x/40x cd/rw xa/form2 cdda tray
[   69.716340] Uniform CD-ROM driver Revision: 3.20
[   69.716463] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   69.807336] sr1: scsi3-mmc drive: 206x/52x writer cd/rw xa/form2 cdda tray
[   69.807464] sr 1:0:0:0: Attached scsi CD-ROM sr1
[   69.885306] sr2: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[   69.885426] sr 2:0:0:0: Attached scsi CD-ROM sr2
[   69.917302] sr3: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[   69.917424] sr 3:0:0:0: Attached scsi CD-ROM sr3
[   69.949532] sr4: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[   69.949661] sr 4:0:0:0: Attached scsi CD-ROM sr4
[   70.025524] sr5: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[   70.025654] sr 5:0:0:0: Attached scsi CD-ROM sr5
[   70.057553] sr6: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[   70.057681] sr 6:0:0:0: Attached scsi CD-ROM sr6
[   70.090529] sr7: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[   70.090662] sr 7:0:0:0: Attached scsi CD-ROM sr7
[   70.124512] sr8: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   70.124651] sr 8:0:0:0: Attached scsi CD-ROM sr8
[   70.158521] sr9: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[   70.158655] sr 9:0:0:0: Attached scsi CD-ROM sr9
[   70.236499] sr10: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[   70.236623] sr 10:0:0:0: Attached scsi CD-ROM sr10
[   70.322488] sr11: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[   70.322629] sr 11:0:0:0: Attached scsi CD-ROM sr11
[   70.545822] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   70.545871] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   70.545916] sr 2:0:0:0: Attached scsi generic sg2 type 5
[   70.545969] sr 3:0:0:0: Attached scsi generic sg3 type 5
[   70.546015] sr 4:0:0:0: Attached scsi generic sg4 type 5
[   70.546066] sr 5:0:0:0: Attached scsi generic sg5 type 5
[   70.546110] sr 6:0:0:0: Attached scsi generic sg6 type 5
[   70.546156] sr 7:0:0:0: Attached scsi generic sg7 type 5
[   70.546200] sr 8:0:0:0: Attached scsi generic sg8 type 5
[   70.546244] sr 9:0:0:0: Attached scsi generic sg9 type 5
[   70.546291] sr 10:0:0:0: Attached scsi generic sg10 type 5
[   70.546347] sr 11:0:0:0: Attached scsi generic sg11 type 5
[   76.668537] No dock devices found.
[   77.073439] input: Power Button (FF) as /class/input/input2
[   77.073481] ACPI: Power Button (FF) [PWRF]
[   77.073578] input: Power Button (CM) as /class/input/input3
[   77.073610] ACPI: Power Button (CM) [PWRB]
[   77.073695] input: Sleep Button (CM) as /class/input/input4
[   77.073732] ACPI: Sleep Button (CM) [SLPB]
[   79.806701] eth3: no IPv6 routers present
[   82.853943] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   82.853956] apm: overridden by ACPI.
[   83.311258] Failure registering capabilities with primary security module.
[   55.040000] Marking TSC unstable due to: cpufreq changes.
[   55.050000] Time: acpi_pm clocksource has been installed.
[   55.630000] tun: Universal TUN/TAP device driver, 1.6
[   55.630000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[   55.630000] tun0: Disabled Privacy Extensions
[   56.220000] Clocksource tsc unstable (delta = -75982222 ns)
[   60.380000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[   61.810000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[  151.860000] usb 4-3.4: USB disconnect, address 8
[  152.150000] usb 4-3.4: new full speed USB device using ehci_hcd and address 9
[  152.280000] usb 4-3.4: configuration #1 chosen from 1 choice
[  152.280000] hub 4-3.4:1.0: USB hub found
[  152.280000] hub 4-3.4:1.0: 4 ports detected
[  164.780000] usb 4-3.4.3: new full speed USB device using ehci_hcd and address 10
[  164.920000] usb 4-3.4.3: not running at top speed; connect to a high speed hub
[  164.920000] usb 4-3.4.3: configuration #1 chosen from 1 choice
[  164.950000] scsi12 : SCSI emulation for USB Mass Storage devices
[  164.990000] usb-storage: device found at 10
[  164.990000] usb-storage: waiting for device to settle before scanning
[  167.860000] usb 4-3.4.2: new full speed USB device using ehci_hcd and address 11
[  167.990000] usb 4-3.4.2: not running at top speed; connect to a high speed hub
[  167.990000] usb 4-3.4.2: configuration #1 chosen from 1 choice
[  167.990000] scsi13 : SCSI emulation for USB Mass Storage devices
[  167.990000] usb-storage: device found at 11
[  167.990000] usb-storage: waiting for device to settle before scanning
[  170.020000] usb-storage: device scan complete
[  170.030000] scsi 12:0:0:0: CD-ROM            CREATIVE CD5233E          1.00 PQ: 0 ANSI: 0 CCS
[  170.170000] sr12: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[  170.170000] sr 12:0:0:0: Attached scsi CD-ROM sr12
[  170.170000] sr 12:0:0:0: Attached scsi generic sg12 type 5
[  172.990000] usb-storage: device scan complete
[  172.990000] scsi 13:0:0:0: CD-ROM            CREATIVE CD5233E          1.00 PQ: 0 ANSI: 0 CCS
[  173.120000] sr13: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[  173.120000] sr 13:0:0:0: Attached scsi CD-ROM sr13
[  173.120000] sr 13:0:0:0: Attached scsi generic sg13 type 5
[  177.520000] usb 4-3.4.4: new full speed USB device using ehci_hcd and address 12
[  177.630000] usb 4-3.4.4: not running at top speed; connect to a high speed hub
[  177.630000] usb 4-3.4.4: configuration #1 chosen from 1 choice
[  177.630000] scsi14 : SCSI emulation for USB Mass Storage devices
[  177.630000] usb-storage: device found at 12
[  177.630000] usb-storage: waiting for device to settle before scanning
[  182.640000] usb-storage: device scan complete
[  182.650000] scsi 14:0:0:0: CD-ROM            CD-ROM   Drive/F5B        1.00 PQ: 0 ANSI: 0 CCS
[  182.660000] sr14: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[  182.660000] sr 14:0:0:0: Attached scsi CD-ROM sr14
[  182.660000] sr 14:0:0:0: Attached scsi generic sg14 type 5
[  183.480000] usb 4-3.4.1: new full speed USB device using ehci_hcd and address 13
[  183.590000] usb 4-3.4.1: not running at top speed; connect to a high speed hub
[  183.590000] usb 4-3.4.1: configuration #1 chosen from 1 choice
[  183.590000] scsi15 : SCSI emulation for USB Mass Storage devices
[  183.590000] usb-storage: device found at 13
[  183.590000] usb-storage: waiting for device to settle before scanning
[  188.600000] usb-storage: device scan complete
[  188.690000] usb 4-3.4.1: reset full speed USB device using ehci_hcd and address 13
[  188.820000] scsi 15:0:0:0: CD-ROM            CREATIVE  CD5233E         2.05 PQ: 0 ANSI: 0 CCS
[  188.970000] sr15: scsi3-mmc drive: 0x/56x cd/rw xa/form2 cdda tray
[  188.970000] sr 15:0:0:0: Attached scsi CD-ROM sr15
[  188.970000] sr 15:0:0:0: Attached scsi generic sg15 type 5
[ 3659.100000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3842.830000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3854.250000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3867.330000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3908.570000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3967.980000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 4131.800000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[622094.060000] ip_tables: (C) 2000-2006 Netfilter Core Team