> dmesg
[ 0.000000] Linux version 2.6.22-14-server (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease)
(Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 08:27:05 UTC 2008 (Ubuntu 2.6.22-14.52-server)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001def0000 (usable)
[ 0.000000] BIOS-e820: 000000001def0000 - 000000001def3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001def3000 - 000000001df00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 478MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f3940
[ 0.000000] Entering add_active_range(0, 0, 122608) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 122608
[ 0.000000] HighMem 122608 -> 122608
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 122608
[ 0.000000] On node 0 totalpages: 122608
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 925 pages used for memmap
[ 0.000000] Normal zone: 117587 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7A10 checksum 0
[ 0.000000] ACPI: RSDP 000F7A10, 0014 (r0 CX700 )
[ 0.000000] ACPI: RSDT 1DEF3040, 0030 (r1 CX700 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 1DEF30C0, 0074 (r1 CX700 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 1DEF3180, 496C (r1 CX700 AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1DEF0000, 0040
[ 0.000000] ACPI: MCFG 1DEF7C00, 003C (r1 CX700 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 1DEF7B40, 005A (r1 CX700 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1df00000:c2100000)
[ 0.000000] Built 1 zonelists. Total pages: 121651
[ 0.000000] Kernel command line: root=UUID=d61673b7-c550-4610-b9af-af4a8676acd1 ro nosplash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 999.900 MHz processor.
[ 27.842019] Console: colour VGA+ 80x25
[ 27.844535] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 27.845352] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 27.876960] Memory: 474600k/490432k available (2047k kernel code, 15292k reserved, 920k data, 364k init, 0k highmem)
[ 27.877056] virtual kernel memory layout:
[ 27.877060] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 27.877065] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 27.877070] vmalloc : 0xde800000 - 0xffbfe000 ( 531 MB)
[ 27.877075] lowmem : 0xc0000000 - 0xddef0000 ( 478 MB)
[ 27.877080] .init : 0xc03eb000 - 0xc0446000 ( 364 kB)
[ 27.877085] .data : 0xc02ffd96 - 0xc03e5f04 ( 920 kB)
[ 27.877090] .text : 0xc0100000 - 0xc02ffd96 (2047 kB)
[ 27.877467] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 27.877657] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 28.027728] Calibrating delay using timer specific routine.. 2000.96 BogoMIPS (lpj=10004814)
[ 28.027873] Security Framework v1.0.0 initialized
[ 28.027931] SELinux: Disabled at boot.
[ 28.028023] Mount-cache hash table entries: 512
[ 28.028283] CPU: After generic identify, caps: 87c9bbff 00000000 00000000 00000000 00000081 00000000 00000000
[ 28.028308] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 28.028365] CPU: L2 Cache: 128K (64 bytes/line)
[ 28.028416] CPU: After all inits, caps: 07c9bbff 00000000 00000000 00000000 00000081 00003fcc 00000000
[ 28.028439] Compat vDSO mapped to ffffe000.
[ 28.028512] Checking 'hlt' instruction... OK.
[ 28.068083] SMP alternatives: switching to UP code
[ 28.068613] Freeing SMP alternatives: 11k freed
[ 28.069391] Early unpacking initramfs... done
[ 29.157840] ACPI: Core revision 20070126
[ 29.158047] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 29.165995] CPU0: Centaur VIA Esther processor 1000MHz stepping 09
[ 29.166185] Total of 1 processors activated (2000.96 BogoMIPS).
[ 29.166421] ENABLING IO-APIC IRQs
[ 29.166688] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 29.377681] Brought up 1 CPUs
[ 29.377941] Booting paravirtualized kernel on bare hardware
[ 29.378092] Time: 15:07:07 Date: 08/10/108
[ 29.378179] NET: Registered protocol family 16
[ 29.378384] EISA bus registered
[ 29.378445] ACPI: bus type pci registered
[ 29.385090] PCI: PCI BIOS revision 3.00 entry at 0xf95e0, last bus=128
[ 29.385141] PCI: Using configuration type 1
[ 29.385189] Setting up standard PCI resources
[ 29.396037] ACPI: EC: Look up EC in DSDT
[ 29.410143] ACPI: Interpreter enabled
[ 29.410200] ACPI: (supports S0 S1 S3 S4 S5)
[ 29.410468] ACPI: Using IOAPIC for interrupt routing
[ 29.422654] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 29.422729] PCI: Probing PCI hardware (bus 00)
[ 29.423811] PCI: Transparent bridge - 0000:00:13.1
[ 29.423900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 29.424489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[ 29.485480] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 29.485554] PCI: Probing PCI hardware (bus 80)
[ 29.485730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 29.487049] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 6 7 10 11 12)
[ 29.487869] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12)
[ 29.488663] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[ 29.489455] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[ 29.490219] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 29.491007] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 29.491794] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 29.492581] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 29.493225] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.493293] pnp: PnP ACPI init
[ 29.493355] ACPI: bus type pnp registered
[ 29.499537] pnp: PnP ACPI: found 11 devices
[ 29.499593] ACPI: ACPI bus type pnp unregistered
[ 29.499645] PnPBIOS: Disabled by ACPI PNP
[ 29.499795] PCI: Using ACPI for IRQ routing
[ 29.499846] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 30.062874] NET: Registered protocol family 8
[ 30.062922] NET: Registered protocol family 20
[ 30.062986] NetLabel: Initializing
[ 30.063032] NetLabel: domain hash size = 128
[ 30.063080] NetLabel: protocols = UNLABELED CIPSOv4
[ 30.063152] NetLabel: unlabeled traffic allowed by default
[ 30.063318] pnp: 00:01: ioport range 0x400-0x47f has been reserved
[ 30.063372] pnp: 00:01: ioport range 0x500-0x50f has been reserved
[ 30.063446] pnp: 00:07: iomem range 0xf0000000-0xf0000fff has been reserved
[ 30.063508] pnp: 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
[ 30.063578] pnp: 00:0a: iomem range 0xf0000-0xfffff could not be reserved
[ 30.063633] pnp: 00:0a: iomem range 0x1def0000-0x1defffff could not be reserved
[ 30.063696] pnp: 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
[ 30.063758] pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 30.067552] Time: tsc clocksource has been installed.
[ 30.094387] PCI: Bridge: 0000:00:01.0
[ 30.094435] IO window: e000-efff
[ 30.094486] MEM window: dd000000-deffffff
[ 30.094537] PREFETCH window: a0000000-bfffffff
[ 30.094588] PCI: Bridge: 0000:00:13.1
[ 30.094636] IO window: d000-dfff
[ 30.094686] MEM window: dfe00000-dfefffff
[ 30.094736] PREFETCH window: dfd00000-dfdfffff
[ 30.094801] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 30.094815] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 30.094849] NET: Registered protocol family 2
[ 30.187623] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 30.187774] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 30.188289] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 30.188639] TCP: Hash tables configured (established 16384 bind 16384)
[ 30.188691] TCP reno registered
[ 30.217840] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[ 31.265440] it is
[ 32.366624] Freeing initrd memory: 7142k freed
[ 32.367185] audit: initializing netlink socket (disabled)
[ 32.367253] audit(1221059228.700:1): initialized
[ 32.372209] VFS: Disk quotas dquot_6.5.1
[ 32.372388] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 32.372642] io scheduler noop registered
[ 32.372691] io scheduler anticipatory registered
[ 32.372740] io scheduler deadline registered (default)
[ 32.372841] io scheduler cfq registered
[ 32.372912] PCI: VIA PCI bridge detected. Disabling DAC.
[ 32.373033] Boot video device is 0000:01:00.0
[ 32.373340] isapnp: Scanning for PnP cards...
[ 32.730163] isapnp: No Plug & Play device found
[ 32.824203] Real Time Clock Driver v1.12ac
[ 32.824407] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 32.827509] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 32.828030] input: Macintosh mouse button emulation as /class/input/input0
[ 32.828301] PNP: No PS/2 controller found. Probing ports directly.
[ 33.077307] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 33.077645] mice: PS/2 mouse device common for all mice
[ 33.077906] EISA: Probing bus 0 at eisa.0
[ 33.078023] EISA: Detected 0 cards.
[ 33.078348] TCP cubic registered
[ 33.078419] NET: Registered protocol family 1
[ 33.078520] Using IPI No-Shortcut mode
[ 33.078922] Magic number: 8:424:133
[ 33.079284] hash matches device device:08
[ 33.079837] Freeing unused kernel memory: 364k freed
[ 33.612010] AppArmor: AppArmor initialized<5>audit(1221059230.200:2): type=1505 info="AppArmor initialized" pid=1096
[ 33.638774] fuse init (API version 7.8)
[ 33.651168] Failure registering capabilities with primary security module.
[ 35.393591] SCSI subsystem initialized
[ 35.420114] libata version 2.21 loaded.
[ 35.423421] usbcore: registered new interface driver usbfs
[ 35.423520] usbcore: registered new interface driver hub
[ 35.423628] usbcore: registered new device driver usb
[ 35.438559] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 35.438621] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 35.440102] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[ 35.440188] VP_IDE: chipset revision 0
[ 35.440235] VP_IDE: not 100% native mode: will probe irqs later
[ 35.440296] VP_IDE: VIA cx700 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[ 35.440361] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio
[ 35.440496] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
[ 35.440626] Probing IDE interface ide0...
[ 35.452020] USB Universal Host Controller Interface driver v3.0
[ 35.970962] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 35.971027] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 36.126950] Probing IDE interface ide1...
[ 36.566888] hdc: TOSHIBA MK4025GAS, ATA DISK drive
[ 37.286852] ide1 at 0x170-0x177,0x376 on irq 15
[ 37.337480] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 37.337596] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 37.338009] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 37.338105] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000fe00
[ 37.338429] usb usb1: configuration #1 chosen from 1 choice
[ 37.338535] hub 1-0:1.0: USB hub found
[ 37.338592] hub 1-0:1.0: 2 ports detected
[ 37.358337] hdc: max request size: 128KiB
[ 37.360179] hdc: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33)
[ 37.360426] hdc: cache flushes supported
[ 37.360552] hdc: hdc1 hdc2 hdc3
[ 37.446971] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 17
[ 37.447085] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 37.447178] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 37.447271] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000fd00
[ 37.447550] usb usb2: configuration #1 chosen from 1 choice
[ 37.447656] hub 2-0:1.0: USB hub found
[ 37.447713] hub 2-0:1.0: 2 ports detected
[ 37.556922] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 18
[ 37.557037] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 37.557132] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 37.557222] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000fc00
[ 37.557499] usb usb3: configuration #1 chosen from 1 choice
[ 37.557603] hub 3-0:1.0: USB hub found
[ 37.557661] hub 3-0:1.0: 2 ports detected
[ 37.667161] ACPI: PCI Interrupt 0000:00:10.4[D] -> GSI 23 (level, low) -> IRQ 19
[ 37.667280] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 37.667388] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 37.667500] ehci_hcd 0000:00:10.4: debug port 1
[ 37.667566] ehci_hcd 0000:00:10.4: irq 19, io mem 0xdffff000
[ 37.726751] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 37.726835] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.727153] usb usb4: configuration #1 chosen from 1 choice
[ 37.727260] hub 4-0:1.0: USB hub found
[ 37.727319] hub 4-0:1.0: 6 ports detected
[ 37.837138] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 20
[ 37.842617] eth0: VIA Rhine III at 0x1de00, 00:40:63:f4:69:f6, IRQ 20.
[ 37.843571] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 43e1.
[ 38.135526] kjournald starting. Commit interval 5 seconds
[ 38.135597] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.436505] usb 4-3: new high speed USB device using ehci_hcd and address 4
[ 39.587868] usb 4-3: configuration #1 chosen from 1 choice
[ 39.588257] hub 4-3:1.0: USB hub found
[ 39.588552] hub 4-3:1.0: 4 ports detected
[ 40.256385] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 40.432826] usb 2-2: configuration #1 chosen from 1 choice
[ 40.435695] hub 2-2:1.0: USB hub found
[ 40.438639] hub 2-2:1.0: 4 ports detected
[ 40.826319] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 41.003984] usb 1-1: configuration #1 chosen from 1 choice
[ 41.006874] hub 1-1:1.0: USB hub found
[ 41.009809] hub 1-1:1.0: 4 ports detected
[ 41.396256] usb 1-2: new full speed USB device using uhci_hcd and address 4
[ 41.573928] usb 1-2: configuration #1 chosen from 1 choice
[ 41.576801] hub 1-2:1.0: USB hub found
[ 41.579743] hub 1-2:1.0: 4 ports detected
[ 41.926474] usb 4-3.1: new full speed USB device using ehci_hcd and address 6
[ 42.037541] usb 4-3.1: configuration #1 chosen from 1 choice
[ 42.276352] usb 4-3.3: new full speed USB device using ehci_hcd and address 7
[ 42.392552] usb 4-3.3: configuration #1 chosen from 1 choice
[ 42.626362] usb 4-3.4: new full speed USB device using ehci_hcd and address 8
[ 42.737182] usb 4-3.4: configuration #1 chosen from 1 choice
[ 42.737419] hub 4-3.4:1.0: USB hub found
[ 42.737604] hub 4-3.4:1.0: 4 ports detected
[ 43.087344] usb 2-2.1: new full speed USB device using uhci_hcd and address 3
[ 43.193327] usb 2-2.1: not running at top speed; connect to a high speed hub
[ 43.221533] usb 2-2.1: configuration #1 chosen from 1 choice
[ 43.467309] usb 2-2.2: new full speed USB device using uhci_hcd and address 4
[ 43.573285] usb 2-2.2: not running at top speed; connect to a high speed hub
[ 43.601495] usb 2-2.2: configuration #1 chosen from 1 choice
[ 43.847259] usb 2-2.3: new full speed USB device using uhci_hcd and address 5
[ 43.953242] usb 2-2.3: not running at top speed; connect to a high speed hub
[ 43.981451] usb 2-2.3: configuration #1 chosen from 1 choice
[ 44.227214] usb 2-2.4: new full speed USB device using uhci_hcd and address 6
[ 44.333201] usb 2-2.4: not running at top speed; connect to a high speed hub
[ 44.361410] usb 2-2.4: configuration #1 chosen from 1 choice
[ 44.607414] usb 1-1.1: new full speed USB device using uhci_hcd and address 5
[ 44.713387] usb 1-1.1: not running at top speed; connect to a high speed hub
[ 44.741596] usb 1-1.1: configuration #1 chosen from 1 choice
[ 44.987360] usb 1-1.2: new full speed USB device using uhci_hcd and address 6
[ 45.093345] usb 1-1.2: not running at top speed; connect to a high speed hub
[ 45.121586] usb 1-1.2: configuration #1 chosen from 1 choice
[ 45.367319] usb 1-1.3: new full speed USB device using uhci_hcd and address 7
[ 45.473300] usb 1-1.3: not running at top speed; connect to a high speed hub
[ 45.501510] usb 1-1.3: configuration #1 chosen from 1 choice
[ 45.747274] usb 1-1.4: new full speed USB device using uhci_hcd and address 8
[ 45.852256] usb 1-1.4: not running at top speed; connect to a high speed hub
[ 45.880479] usb 1-1.4: configuration #1 chosen from 1 choice
[ 46.127231] usb 1-2.1: new full speed USB device using uhci_hcd and address 9
[ 46.233212] usb 1-2.1: not running at top speed; connect to a high speed hub
[ 46.261464] usb 1-2.1: configuration #1 chosen from 1 choice
[ 46.507189] usb 1-2.2: new full speed USB device using uhci_hcd and address 10
[ 46.613172] usb 1-2.2: not running at top speed; connect to a high speed hub
[ 46.640419] usb 1-2.2: configuration #1 chosen from 1 choice
[ 46.887144] usb 1-2.3: new full speed USB device using uhci_hcd and address 11
[ 46.993138] usb 1-2.3: not running at top speed; connect to a high speed hub
[ 47.020363] usb 1-2.3: configuration #1 chosen from 1 choice
[ 47.267107] usb 1-2.4: new full speed USB device using uhci_hcd and address 12
[ 47.373106] usb 1-2.4: not running at top speed; connect to a high speed hub
[ 47.401345] usb 1-2.4: configuration #1 chosen from 1 choice
[ 50.679513] eth3: link up, 100Mbps, full-duplex, lpa 0x43E1
[ 52.754126] NET: Registered protocol family 17
[ 55.551338] Linux agpgart interface v0.102 (c) Dave Jones
[ 55.732310] agpgart: Detected VIA CX700 chipset
[ 55.736908] agpgart: AGP aperture is 64M @ 0xd8000000
[ 55.829037] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 56.154824] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 60.793006] usbcore: registered new interface driver libusual
[ 64.381139] Initializing USB Mass Storage driver...
[ 64.423904] scsi0 : SCSI emulation for USB Mass Storage devices
[ 64.424198] usb-storage: device found at 3
[ 64.424205] usb-storage: waiting for device to settle before scanning
[ 64.424243] scsi1 : SCSI emulation for USB Mass Storage devices
[ 64.424440] usb-storage: device found at 4
[ 64.424446] usb-storage: waiting for device to settle before scanning
[ 64.424480] scsi2 : SCSI emulation for USB Mass Storage devices
[ 64.424706] usb-storage: device found at 5
[ 64.424713] usb-storage: waiting for device to settle before scanning
[ 64.424747] scsi3 : SCSI emulation for USB Mass Storage devices
[ 64.424954] usb-storage: device found at 6
[ 64.424961] usb-storage: waiting for device to settle before scanning
[ 64.425001] scsi4 : SCSI emulation for USB Mass Storage devices
[ 64.425203] usb-storage: device found at 5
[ 64.425209] usb-storage: waiting for device to settle before scanning
[ 64.425243] scsi5 : SCSI emulation for USB Mass Storage devices
[ 64.425454] usb-storage: device found at 6
[ 64.425461] usb-storage: waiting for device to settle before scanning
[ 64.425494] scsi6 : SCSI emulation for USB Mass Storage devices
[ 64.425687] usb-storage: device found at 7
[ 64.425693] usb-storage: waiting for device to settle before scanning
[ 64.425727] scsi7 : SCSI emulation for USB Mass Storage devices
[ 64.425929] usb-storage: device found at 8
[ 64.425935] usb-storage: waiting for device to settle before scanning
[ 64.425969] scsi8 : SCSI emulation for USB Mass Storage devices
[ 64.426171] usb-storage: device found at 9
[ 64.426178] usb-storage: waiting for device to settle before scanning
[ 64.426212] scsi9 : SCSI emulation for USB Mass Storage devices
[ 64.426413] usb-storage: device found at 10
[ 64.426420] usb-storage: waiting for device to settle before scanning
[ 64.426453] scsi10 : SCSI emulation for USB Mass Storage devices
[ 64.426682] usb-storage: device found at 11
[ 64.426688] usb-storage: waiting for device to settle before scanning
[ 64.426723] scsi11 : SCSI emulation for USB Mass Storage devices
[ 64.426914] usbcore: registered new interface driver usb-storage
[ 64.426969] USB Mass Storage support registered.
[ 64.427020] usb-storage: device found at 12
[ 64.427026] usb-storage: waiting for device to settle before scanning
[ 64.790189] Linux video capture interface: v2.00
[ 64.871844] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
[ 65.186275] input: PC Speaker as /class/input/input1
[ 65.245625] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 65.245767] PCI: Setting latency timer of device 0000:80:01.0 to 64
[ 65.421297] usbcore: registered new interface driver gspca
[ 65.421364] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 65.423573] usbcore: registered new interface driver usbserial
[ 65.423671] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 65.423808] usbcore: registered new interface driver usbserial_generic
[ 65.423864] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 65.479015] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
[ 65.479167] ftdi_sio 4-3.3:1.0: FTDI USB Serial Device converter detected
[ 65.479269] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: Detected FT232RL
[ 65.479721] usb 4-3.3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 65.479811] usbcore: registered new interface driver ftdi_sio
[ 65.479864] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
[ 65.501708] usbcore: registered new interface driver snd-usb-audio
[ 67.205394] lp: driver loaded but no devices found
[ 67.437976] Adding 2096472k swap on /dev/hdc3. Priority:-1 extents:1 across:2096472k
[ 68.017065] EXT3 FS on hdc2, internal journal
[ 68.939868] NET: Registered protocol family 10
[ 68.940080] lo: Disabled Privacy Extensions
[ 69.424447] usb-storage: device scan complete
[ 69.424682] usb-storage: device scan complete
[ 69.424713] usb-storage: device scan complete
[ 69.424791] usb-storage: device scan complete
[ 69.424872] usb-storage: device scan complete
[ 69.424954] usb-storage: device scan complete
[ 69.425027] usb-storage: device scan complete
[ 69.425098] usb-storage: device scan complete
[ 69.425168] usb-storage: device scan complete
[ 69.425241] usb-storage: device scan complete
[ 69.425321] usb-storage: device scan complete
[ 69.425452] usb-storage: device scan complete
[ 69.427693] scsi 3:0:0:0: CD-ROM LITE-ON CD-ROM LTN-529S 7S06 PQ: 0 ANSI: 0 CCS
[ 69.428466] scsi 4:0:0:0: CD-ROM LITE-ON COMBO SOHC-5232K NK0A PQ: 0 ANSI: 0
[ 69.428550] scsi 6:0:0:0: CD-ROM ATAPI CD-RW 52XMax 160D PQ: 0 ANSI: 0 CCS
[ 69.428622] scsi 7:0:0:0: CD-ROM OEM CD-ROM F563E 1.00 PQ: 0 ANSI: 0 CCS
[ 69.428677] scsi 8:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8481B 1.00 PQ: 0 ANSI: 0
[ 69.428730] scsi 9:0:0:0: CD-ROM LITE-ON CD-ROM LTN-527T 5S0C PQ: 0 ANSI: 0 CCS
[ 69.432697] scsi 0:0:0:0: CD-ROM HITACHI DVD-ROM GD-5000 0212 PQ: 0 ANSI: 0 CCS
[ 69.432969] scsi 1:0:0:0: CD-ROM SONY CD-RW CRX230ED 4YS1 PQ: 0 ANSI: 0
[ 69.433094] scsi 2:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8520B 1.00 PQ: 0 ANSI: 0 CCS
[ 69.433241] scsi 5:0:0:0: CD-ROM LG CD-ROM CRD-8522B 2.03 PQ: 0 ANSI: 0 CCS
[ 69.433295] scsi 10:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8522B 1.00 PQ: 0 ANSI: 0 CCS
[ 69.433375] scsi 11:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8523B 1.01 PQ: 0 ANSI: 0 CCS
[ 69.716327] sr0: scsi3-mmc drive: 14x/40x cd/rw xa/form2 cdda tray
[ 69.716340] Uniform CD-ROM driver Revision: 3.20
[ 69.716463] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 69.807336] sr1: scsi3-mmc drive: 206x/52x writer cd/rw xa/form2 cdda tray
[ 69.807464] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 69.885306] sr2: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 69.885426] sr 2:0:0:0: Attached scsi CD-ROM sr2
[ 69.917302] sr3: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 69.917424] sr 3:0:0:0: Attached scsi CD-ROM sr3
[ 69.949532] sr4: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 69.949661] sr 4:0:0:0: Attached scsi CD-ROM sr4
[ 70.025524] sr5: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 70.025654] sr 5:0:0:0: Attached scsi CD-ROM sr5
[ 70.057553] sr6: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 70.057681] sr 6:0:0:0: Attached scsi CD-ROM sr6
[ 70.090529] sr7: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[ 70.090662] sr 7:0:0:0: Attached scsi CD-ROM sr7
[ 70.124512] sr8: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 70.124651] sr 8:0:0:0: Attached scsi CD-ROM sr8
[ 70.158521] sr9: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 70.158655] sr 9:0:0:0: Attached scsi CD-ROM sr9
[ 70.236499] sr10: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 70.236623] sr 10:0:0:0: Attached scsi CD-ROM sr10
[ 70.322488] sr11: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 70.322629] sr 11:0:0:0: Attached scsi CD-ROM sr11
[ 70.545822] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 70.545871] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 70.545916] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 70.545969] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 70.546015] sr 4:0:0:0: Attached scsi generic sg4 type 5
[ 70.546066] sr 5:0:0:0: Attached scsi generic sg5 type 5
[ 70.546110] sr 6:0:0:0: Attached scsi generic sg6 type 5
[ 70.546156] sr 7:0:0:0: Attached scsi generic sg7 type 5
[ 70.546200] sr 8:0:0:0: Attached scsi generic sg8 type 5
[ 70.546244] sr 9:0:0:0: Attached scsi generic sg9 type 5
[ 70.546291] sr 10:0:0:0: Attached scsi generic sg10 type 5
[ 70.546347] sr 11:0:0:0: Attached scsi generic sg11 type 5
[ 76.668537] No dock devices found.
[ 77.073439] input: Power Button (FF) as /class/input/input2
[ 77.073481] ACPI: Power Button (FF) [PWRF]
[ 77.073578] input: Power Button (CM) as /class/input/input3
[ 77.073610] ACPI: Power Button (CM) [PWRB]
[ 77.073695] input: Sleep Button (CM) as /class/input/input4
[ 77.073732] ACPI: Sleep Button (CM) [SLPB]
[ 79.806701] eth3: no IPv6 routers present
[ 82.853943] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 82.853956] apm: overridden by ACPI.
[ 83.311258] Failure registering capabilities with primary security module.
[ 55.040000] Marking TSC unstable due to: cpufreq changes.
[ 55.050000] Time: acpi_pm clocksource has been installed.
[ 55.630000] tun: Universal TUN/TAP device driver, 1.6
[ 55.630000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 55.630000] tun0: Disabled Privacy Extensions
[ 56.220000] Clocksource tsc unstable (delta = -75982222 ns)
[ 60.380000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 61.810000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 151.860000] usb 4-3.4: USB disconnect, address 8
[ 152.150000] usb 4-3.4: new full speed USB device using ehci_hcd and address 9
[ 152.280000] usb 4-3.4: configuration #1 chosen from 1 choice
[ 152.280000] hub 4-3.4:1.0: USB hub found
[ 152.280000] hub 4-3.4:1.0: 4 ports detected
[ 164.780000] usb 4-3.4.3: new full speed USB device using ehci_hcd and address 10
[ 164.920000] usb 4-3.4.3: not running at top speed; connect to a high speed hub
[ 164.920000] usb 4-3.4.3: configuration #1 chosen from 1 choice
[ 164.950000] scsi12 : SCSI emulation for USB Mass Storage devices
[ 164.990000] usb-storage: device found at 10
[ 164.990000] usb-storage: waiting for device to settle before scanning
[ 167.860000] usb 4-3.4.2: new full speed USB device using ehci_hcd and address 11
[ 167.990000] usb 4-3.4.2: not running at top speed; connect to a high speed hub
[ 167.990000] usb 4-3.4.2: configuration #1 chosen from 1 choice
[ 167.990000] scsi13 : SCSI emulation for USB Mass Storage devices
[ 167.990000] usb-storage: device found at 11
[ 167.990000] usb-storage: waiting for device to settle before scanning
[ 170.020000] usb-storage: device scan complete
[ 170.030000] scsi 12:0:0:0: CD-ROM CREATIVE CD5233E 1.00 PQ: 0 ANSI: 0 CCS
[ 170.170000] sr12: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[ 170.170000] sr 12:0:0:0: Attached scsi CD-ROM sr12
[ 170.170000] sr 12:0:0:0: Attached scsi generic sg12 type 5
[ 172.990000] usb-storage: device scan complete
[ 172.990000] scsi 13:0:0:0: CD-ROM CREATIVE CD5233E 1.00 PQ: 0 ANSI: 0 CCS
[ 173.120000] sr13: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[ 173.120000] sr 13:0:0:0: Attached scsi CD-ROM sr13
[ 173.120000] sr 13:0:0:0: Attached scsi generic sg13 type 5
[ 177.520000] usb 4-3.4.4: new full speed USB device using ehci_hcd and address 12
[ 177.630000] usb 4-3.4.4: not running at top speed; connect to a high speed hub
[ 177.630000] usb 4-3.4.4: configuration #1 chosen from 1 choice
[ 177.630000] scsi14 : SCSI emulation for USB Mass Storage devices
[ 177.630000] usb-storage: device found at 12
[ 177.630000] usb-storage: waiting for device to settle before scanning
[ 182.640000] usb-storage: device scan complete
[ 182.650000] scsi 14:0:0:0: CD-ROM CD-ROM Drive/F5B 1.00 PQ: 0 ANSI: 0 CCS
[ 182.660000] sr14: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[ 182.660000] sr 14:0:0:0: Attached scsi CD-ROM sr14
[ 182.660000] sr 14:0:0:0: Attached scsi generic sg14 type 5
[ 183.480000] usb 4-3.4.1: new full speed USB device using ehci_hcd and address 13
[ 183.590000] usb 4-3.4.1: not running at top speed; connect to a high speed hub
[ 183.590000] usb 4-3.4.1: configuration #1 chosen from 1 choice
[ 183.590000] scsi15 : SCSI emulation for USB Mass Storage devices
[ 183.590000] usb-storage: device found at 13
[ 183.590000] usb-storage: waiting for device to settle before scanning
[ 188.600000] usb-storage: device scan complete
[ 188.690000] usb 4-3.4.1: reset full speed USB device using ehci_hcd and address 13
[ 188.820000] scsi 15:0:0:0: CD-ROM CREATIVE CD5233E 2.05 PQ: 0 ANSI: 0 CCS
[ 188.970000] sr15: scsi3-mmc drive: 0x/56x cd/rw xa/form2 cdda tray
[ 188.970000] sr 15:0:0:0: Attached scsi CD-ROM sr15
[ 188.970000] sr 15:0:0:0: Attached scsi generic sg15 type 5
[ 3659.100000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3842.830000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3854.250000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3867.330000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3908.570000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 3967.980000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[ 4131.800000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-server/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
[622094.060000] ip_tables: (C) 2000-2006 Netfilter Core Team
|